Corsair Vengeance LPX DDR4 16GB Single Module — High-Speed 3600MHz CL18 Desktop Memory (Single Stick from Kit)

This is a single Corsair Vengeance LPX DDR4 16GB module operating at 3600MHz with tight CL18-22-22-42 timings — originally part of the renowned CMK32GX4M2D3600C18 dual-channel kit. Built on Corsair's iconic Vengeance LPX platform with an 8-layer custom PCB and pure aluminum heat spreader, this single 16GB stick delivers premium overclocking-grade performance at the AMD Ryzen 5000 sweet-spot speed of 3600MHz — the optimal frequency for AMD's Infinity Fabric 1:1 ratio. Each module features hand-screened ICs binned for 3600MHz stability, Intel XMP 2.0 1-click overclocking, and the iconic low-profile 34mm height that ensures compatibility with virtually all CPU coolers including large dual-tower air coolers. This is a SINGLE 16GB module — best paired with another identical Corsair Vengeance LPX 16GB DDR4-3600 CL18 module for guaranteed dual-channel matched performance, or used as a single-channel upgrade.

🚀 Performance Specifications

• Capacity: 16GB single module (1x 16GB)
• Memory Type: DDR4 SDRAM
• Speed: 3600 MT/s (PC4-28800)
• Latency: CL18-22-22-42 (tight performance timings)
• Voltage: 1.35V (XMP 2.0 default)
• Form Factor: 288-pin DIMM (Desktop UDIMM)
• ECC: Non-ECC
• Buffering: Unbuffered
• XMP Profile: Intel XMP 2.0 1-click overclocking
• Original Kit Part Number: CMK32GX4M2D3600C18 (split from 2x16GB kit)
• Manufacturer: Corsair (hand-screened DRAM ICs)

⚡ Why DDR4-3600 CL18 Is the Ryzen Sweet Spot

• AMD Infinity Fabric 1:1 Match: 3600MHz syncs perfectly with Ryzen 5000's Infinity Fabric clock at FCLK 1800MHz — the optimal balance for maximum gaming performance
• 12.5% Faster Than DDR4-3200: Meaningful gains in latency-sensitive workloads, gaming, and content creation
• Premium Tight CL18 Timings: Matched timings of CL18-22-22-42 deliver true latency of 10 ns — significantly faster than CL19/CL20 modules at the same speed
• Hand-Screened Memory ICs: Each IC individually binned for 3600MHz stability — premium chip selection over generic 3600MHz modules
• 8-Layer Custom PCB: Premium board design for signal integrity at 3600MHz — superior overclocking headroom
• XMP 2.0 1-Click Auto-Tune: Automatically configures to 3600MHz on supported boards — no manual BIOS tuning needed
• Compatibility-Tested: Validated across hundreds of Intel and AMD DDR4 motherboards

📌 Single Module Configuration — Pairing Guide

• What This Is: A single 16GB stick (1x 16GB) — half of the original CMK32GX4M2D3600C18 (2x16GB) kit
• For Maximum Performance: Pair with another identical Corsair Vengeance LPX 16GB DDR4-3600 CL18 stick for guaranteed dual-channel matched performance
• Single-Channel Use: Works perfectly as a single 16GB upgrade in any DDR4 motherboard
• Mixing With Other Brands: Possible but matched performance not guaranteed — kit-matched pairs always preferred
• Combine With Existing 16GB: Add to a build that already has 16GB to reach 32GB total (set XMP timings to slowest module's spec)
• Best Pairing Strategy: Buy two identical SKUs from this listing for guaranteed-matched 32GB dual-channel kit

🛡️ Build Quality

• 8-Layer Custom PCB: Premium board design for signal integrity at 3600MHz
• Hand-Screened Memory ICs: Each IC tested for 3600MHz stability
• Pure Aluminum Heat Spreader: Efficient heat dissipation under sustained load
• Low-Profile 34mm Height: Compatible with virtually all CPU coolers including large dual-tower air coolers
• XMP 2.0 1-Click: Auto-tunes to 3600MHz on supported boards
• Compatibility-Tested: Validated across hundreds of motherboards
• Built for Overclocking Headroom: Many users push to 3800MHz+ with custom timings

💻 Platform Compatibility

• AMD (Optimized): Ryzen 3000/5000 series — perfect Infinity Fabric 1:1 match at 3600MHz
• Best AMD Pairings: Ryzen 5 5600X, 5600, 5700X, Ryzen 7 5800X, 5800X3D, 5900X, Ryzen 9 5950X
• Intel: 10th, 11th Gen Core (Z490, Z590, B560, H570 chipsets)
• BIOS: Latest BIOS recommended for guaranteed 3600MHz XMP boot
• Plug-and-Play: Boots at JEDEC default 2666MHz without XMP for guaranteed compatibility
• Form Factor Match: 288-pin DIMM — does NOT fit DDR3 (240-pin) or DDR5 (288-pin different keying) slots
• Slot Requirement: Single DIMM slot — works in any DDR4 motherboard

🎯 Best For

• Ryzen 5000 X3D Builds: 5800X3D and 5700X3D love DDR4-3600 (FCLK sweet spot)
• Gaming PCs chasing every FPS edge on AM4 platform
• Content creators on Ryzen 5000 (video editing, rendering, compilation)
• Streamers running OBS + game + browser simultaneously
• Enthusiasts upgrading 8GB → 16GB single-channel, or buying two for 32GB matched dual-channel
• Existing 16GB owners wanting to expand to 32GB total (compatibility caveats apply)
• Budget-conscious builders who want premium 3600 CL18 performance at single-stick pricing
• SFF builders where low-profile height matters for CPU cooler clearance
• Used PC market — flexible single-stick upgrade path

📋 Key Features

• 16GB single DDR4-3600 module (split from CMK32GX4M2D3600C18 kit)
• 3600 MT/s PC4-28800 data rate with tight CL18-22-22-42 latency
• True latency of 10 ns — premium performance timings
• Intel XMP 2.0 1-click overclocking profile
• 1.35V XMP voltage operation
• 288-pin standard desktop DDR4 DIMM form factor
• Non-ECC, unbuffered for consumer desktop compatibility
• Plug & Play at JEDEC default 2666MHz without XMP
• Sleek black aluminum heat spreader with low-profile 34mm height
• 8-layer custom PCB for premium signal integrity at 3600MHz
• Hand-screened memory ICs binned for 3600MHz stability
• AMD Ryzen 3000/5000 series Infinity Fabric 1:1 sweet spot
• Compatible with Intel 10th/11th Gen and Z490/Z590/B560/H570 chipsets
• Compatibility-tested across hundreds of motherboards
• Iconic Corsair Vengeance LPX gaming line trusted by enthusiasts since 2014
• Single module: pair with identical Corsair LPX 16GB DDR4-3600 CL18 for matched dual-channel
• SKU: RAM-CORS-VENGEANCELPX16GB3600-OB-0091